1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
- 7. Transmissions
   + 7.1. A mechanical five-speed transmission of type
   + 7.2. A mechanical transmission of type МТ 75
   - 7.3. Automatic transmission А4LD
      7.3.1. A technical characteristics
      - 7.3.2. Service and repair The work description Check of level of oil in a transmission Check and washing of a hydrokinetic transmission Check of pressure of oil in a transmission operating time Test of an overload of the engine by hydrokinetic transfer Adjustment of a tape of a brake of forward planetary transfer Removal and installation of a vacuum regulator The hydraulic booster of back planetary transfer A centrifugal regulator of pressure of oil Replacement of a back sealing ring Removal and installation of the mechanism of a choice of transfers Removal and installation of draught of a choice of transfers
         - Adjustment of a cable of mechanism Kick-down
   Cars with the electromagnetic valve Removal and transmission installation Malfunctions of an automatic transmission
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment

b087f616 Cars with the electromagnetic valve

Elements of adjustment of a cable of the mechanism kick-down on cars with the electromagnetic valve

And – the electromagnetic valve,

In – the case,

With – the holder,

D – a bolt of fastening,

Е – a spherical finger of connection of a cable

1. To establish the lever of a choice of transfers to any position, to include ignition (without starting the engine), to press against the stop a pedal of an accelerator and to fix it in this position.
2. To turn counter-clockwise to the full the lever of 5 switchings on the lowest transfer and to establish on a cable a template 17.031 for an exception of a retension of a cable.
3. To weaken bolts of 4 fastenings of an arm of the electromagnetic valve and to move the electromagnetic valve forward to an easy tension of a cable of switching, then to tighten bolts.
4. If adjustment is executed correctly, the electromagnetic valve at giving on it pressure should pull a cable and, turning the lever of 5 switchings clockwise against the stop, to keep it in this position.
5. In case of a retension of a cable of switching the electromagnetic valve is not established in demanded position that leads to return of the lever of switching to a starting position.
6. In case of an insufficient tension of a cable of switching the switching lever is established in demanded position, however there is an overheat of the electromagnetic valve that leads to return of the lever to a starting position.
7. In both cases it is necessary to make repeated adjustment.