FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
- 7. Transmissions
   + 7.1. A mechanical five-speed transmission of type
   + 7.2. A mechanical transmission of type МТ 75
   - 7.3. Automatic transmission А4LD
      7.3.1. A technical characteristics
      - 7.3.2. Service and repair
         7.3.2.1. The work description
         7.3.2.2. Check of level of oil in a transmission
         7.3.2.3. Check and washing of a hydrokinetic transmission
         7.3.2.4. Check of pressure of oil in a transmission operating time
         7.3.2.5. Test of an overload of the engine by hydrokinetic transfer
         7.3.2.6. Adjustment of a tape of a brake of forward planetary transfer
         7.3.2.7. Removal and installation of a vacuum regulator
         7.3.2.8. The hydraulic booster of back planetary transfer
         7.3.2.9. A centrifugal regulator of pressure of oil
         7.3.2.10. Replacement of a back sealing ring
         7.3.2.11. Removal and installation of the mechanism of a choice of transfers
         7.3.2.12. Removal and installation of draught of a choice of transfers
         + 7.3.2.13. Adjustment of a cable of mechanism Kick-down
         7.3.2.14. Removal and transmission installation
         7.3.2.15. Malfunctions of an automatic transmission
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

7.3.2.8. The hydraulic booster of back planetary transfer
THE GENERAL DATA

Removal of the hydraulic booster of back planetary transfer

1 – a cover,

2 – the piston with a rod

Removal and installation

PERFORMANCE ORDER
1. To establish the car over the viewing channel or on the lift.
2. To merge oil from a transmission.
3. Being careful to remove oil картер transmissions.
4. To unscrew a cover of the hydraulic booster of back planetary transfer and to remove it together with a lining.
5. To take the piston of the hydraulic booster of back planetary transfer and if necessary to replace a sealing ring.
6. To check up length of a rod. The length of a rod corresponds to distance between an end face of a rod adjoining to a tape brake and flute edge under a lock ring. If necessary to establish a rod of the demanded length.
7. The further installation is made in sequence, return to removal.