FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
- 7. Transmissions
   + 7.1. A mechanical five-speed transmission of type
   + 7.2. A mechanical transmission of type МТ 75
   - 7.3. Automatic transmission А4LD
      7.3.1. A technical characteristics
      - 7.3.2. Service and repair
         7.3.2.1. The work description
         7.3.2.2. Check of level of oil in a transmission
         7.3.2.3. Check and washing of a hydrokinetic transmission
         7.3.2.4. Check of pressure of oil in a transmission operating time
         7.3.2.5. Test of an overload of the engine by hydrokinetic transfer
         7.3.2.6. Adjustment of a tape of a brake of forward planetary transfer
         7.3.2.7. Removal and installation of a vacuum regulator
         7.3.2.8. The hydraulic booster of back planetary transfer
         7.3.2.9. A centrifugal regulator of pressure of oil
         7.3.2.10. Replacement of a back sealing ring
         7.3.2.11. Removal and installation of the mechanism of a choice of transfers
         7.3.2.12. Removal and installation of draught of a choice of transfers
         + 7.3.2.13. Adjustment of a cable of mechanism Kick-down
         7.3.2.14. Removal and transmission installation
         7.3.2.15. Malfunctions of an automatic transmission
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

7.3.2.15. Malfunctions of an automatic transmission
THE GENERAL DATA

SIGNS
ELIMINATION METHOD
The gear change lever moves hardly or is blocked To check up the gear change lever.
To check up the mechanism of a gear change and ползун the gear change lever.
To check up the relay of safe management of an automatic transmission.
To check up an identification plate of transfer (on картере).
Begin to flow oils at height of hydrokinetic transfer after replacement of a sealing ring, and also the transfer pump To check up correctness of installation of a ring in картере hydrokinetic transfer.
To check up:
  – A condition of back consolidation of a cranked shaft of the engine, and also a sealing ring of the oil pump
  – A tightening of aluminium bolts of hydrokinetic transfer, a drain stopper картера hydrokinetic transfer, and also a welded seam of hydrokinetic transfer.
Traces вытекания oils from a transmission are visible outside To check up:
  – A sealing ring of a back part картера transmissions
  – Horizontal маслопровода on картере and their connections
  – An adjusting bolt of a drive of forward planetary transfer
  – A lining of the lever of a gear change, and also the lever of a reduction of transfers
  – A lining between a back part картера and control connections
  – A lining of the oil pallet
  – A lining of a cable of a drive of a speedometer
  – A lining of a vacuum regulator.
Vytekanie oils without external traces To replace a vacuum regulator.