Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
+ 3.1. Engine OHC
+ 3.2. Engine DOHC
+ 3.3. Engine V6
+ 3.4. Ignition and engine management systems
- 3.5. Diesel engines
3.5.1. A technical characteristics
3.5.2. The repair which is not demanding removal of the engine
3.5.3. Check and adjustment of backlashes of valves
- 3.5.4. Fuel system
3.5.4.1. Atomizers
3.5.4.2. Candles накаливания
3.5.4.3. Compression check
3.5.4.4. Removal of air from fuel system
3.5.4.5. Removal and installation of the fuel pump
3.5.4.6. Check and adjustment of turns of idling
3.5.4.7. A cable of increase in turns of idling
+ 3.5.5. A head of the block of cylinders
3.5.6. Removal and engine installation
+ 3.5.7. Dismantling, repair and engine assemblage
3.5.8. Турбокомпрессор
+ 3.5.9. Greasing system
+ 3.5.10. Cooling system
3.5.11. Typical malfunctions of the engine
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment
|
Candle накаливания with the scorched tip
| PERFORMANCE ORDER |
| For check of candles накаливания to disconnect the tyre of a food from candles. To connect a control lamp (any bulb on pressure 12) one plug to a positive pole of the accumulator, and another to a checked candle established on the engine. If the bulb burns – the candle is serviceable. If the bulb does not burn - the candle is faulty and is subject to replacement. |
|
Обгорание and candle failure накаливания malfunction of atomizers often are a consequence. If there is a scorched candle it is not enough simple replacement. It is necessary to inspect the atomizers, including definition of the form of a torch of dispersion, pressure of operation and tightness. It is important, that at an atomizer was accurate отсечка fuel. |
|
