| 1. To fix the engine on a corresponding bed, to merge oil and to remove the oil filter. |
| 2. To remove the vacuum pump and клиновой a drive belt; to unscrew the vacuum pipeline. |
| 3. To remove completely the generator (together with the holder) and приводные клиновые belts, a roller of the tension device клинового a belt of the pump of a cooling liquid and a belt. |
| 4. To unscrew from a head of the block of cylinders the thermostat of a regulator of the increased number of turns of idling, then to unscrew return fuel hoses and to remove the fuel pump. |
| 5. To unscrew and remove fuel pipelines. To muffle corresponding stoppers of an aperture of pipelines and adaptations of fuel system, not to admit hit there a dust. |
| 6. To take atomizers, their linings and a thermoisolation ring, to disconnect an electric wire and токовую the tyre from candles накаливания and to unscrew them. |
| 7. To disconnect the pipeline of giving of oil to an axis of the lever of valves and to unscrew external holders of an axis of the lever of valves. |
| 8. To unscrew bolts of fastening of a head of the block of cylinders (in return sequence in relation to their tightening) and to remove a head and its lining. |
| 9. To remove the holder of the oil filter and an oil radiator, and then to unscrew the fuel pump with its holder. |
| 10. To remove pulleys of a cranked shaft and the fan; to remove a casing of a chain of system timing. |
| 11. To block a screw-driver the tension device of a chain, to remove the device and its clown, to take a system chain timing and an asterisk of the fuel pump. |
| 12. To remove a flange of fastening of a drive of the fuel pump and the pipeline of giving of oil. |
| 13. To pull together an asterisk from a cranked shaft and to remove the tension device приводной system chains timing. |
| 14. To remove from a flywheel a leading part and a coupling disk, the oil pallet, a stopper of the oil pump, a nut and a bolt of fastening of the oil pump, and then to remove the oil pump. |
| 15. To turn the engine on 180 °, to remove from the block of cylinders an intermediate plate, to take a cam-shaft, and then by means of a stripper to remove an asterisk from a cam-shaft. |
| 16. To take pushers and to establish them in sequence with which they occupy in the engine. |
| 17. To designate covers of radical bearings, and also rods and their covers (from outside the fuel pump). |
| 18. To remove covers of radical bearings and a cover of rods. |
| 19. To take a cranked shaft from the block of cylinders of the engine. |
| 20. To take from cylinders pistons together with rods. |
| 21. To arrange loose leaves together with covers in sequence with which they occupied in the engine. |
