| 1. To remove a wire of weight from the accumulator and the case of the air filter. |
| 2. To disconnect an operating rod of a diaphragm from a side scene throttle заслонки, moving the bottom part of a rod downwards and turning out its end from a nest. |
| 3. To unscrew four screws of fastening of a cover, to uncover and take a spring. |
| 4. Being careful to take a diaphragm and an operating rod from the case. |
| 5. Carefully to clear interfaced surfaces of the case of a diaphragm and a cover and to insert a diaphragm into the case, combining apertures in a diaphragm with a vacuum cavity in the case. |
| 6. To establish a spring and a cover, to combine apertures and to fix a cover screws. |
| 7. To connect an operating rod to a side scene throttle заслонки. |
| 8. To establish the air filter. |
| 9. To connect a wire of weight of the accumulator. |
