FORD SCORPIO

1985-1994 of release

Repair and car operation


Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. A technical characteristics
   5.2. Fuel
   5.3. Neetilirovannyj gasoline of engines V6, 2.4 and 2.9 дм3
   + 5.4. System of giving of air
   - 5.5. Carburettor PIERBURG
      5.5.1. Adjustment of turns of idling and quality of a mix
      5.5.2. Adjustment демпфера throttle заслонки the first chamber
      5.5.3. Adjustment of a starting backlash air заслонки
      5.5.4. Removal and carburettor installation
      5.5.5. Carburettor dismantling
      5.5.6. Carburettor assemblage
      5.5.7. Adjustment of fast idling
      5.5.8. Carburettor Pierburg changes 2V since September 1986 г
   + 5.6. Carburettor WEBER 2V
   + 5.7. Carburettor WEBER 2V TLD
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

5.5.8. Carburettor Pierburg changes 2V since September 1986 г
THE GENERAL DATA

Modernised carburettor Pierburg 2V, established on late engines 1,8 дм3

1 – a submitting fuel hose,

2 – an arrangement rotating vertical шарнирного a clip,

3 – a hose of a diaphragm,

4 – the valve of dump of vacuum of management заслонкой the secondary chamber

Electric connections of modernised carburettor Pierburg 2V, established on late engines 1,8 дм3

 1 – a plait of wires,

2 – the valve of dump of vacuum of a control mean заслонкой the secondary chamber,

3 – grounding,

4 – initial connection of the coil of ignition

On engines since September 1986 the changed carburettor which includes secondary оттяжную a diaphragm заслонки, reducing fuel consumption is established. If the modernised carburettor has to be established on earlier models, always use a new lining and carry out following actions:

 – To connect a socket a special cable;
 – To disconnect a positive wire from the coil of ignition and to connect plugs of a new cable to positive contact of the coil and the disconnected wire of positive potential;
 – To connect contact of grounding of a braid to one of screws of fastening of the coil of ignition.