1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. A technical characteristics
   5.2. Fuel
   5.3. Neetilirovannyj gasoline of engines V6, 2.4 and 2.9 дм3
   + 5.4. System of giving of air
   - 5.5. Carburettor PIERBURG
      5.5.1. Adjustment of turns of idling and quality of a mix
      5.5.2. Adjustment демпфера throttle заслонки the first chamber
      5.5.3. Adjustment of a starting backlash air заслонки
      5.5.4. Removal and carburettor installation
      5.5.5. Carburettor dismantling
      5.5.6. Carburettor assemblage
      5.5.7. Adjustment of fast idling
      5.5.8. Carburettor Pierburg changes 2V since September 1986 г
   + 5.6. Carburettor WEBER 2V
   + 5.7. Carburettor WEBER 2V TLD
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


5.5.7. Adjustment of fast idling

Turns of idling and quality of a mix should be adjusted.

1. To warm up the engine to working temperature.
2. To remove the case of the air filter.
3. To start the engine and to establish the screw of adjustment of fast idling (it is specified by an arrow) in the second top position of a cam of fast idling.
4. To measure engine turns.
5. To remove a seal from the screw of fast idling. To switch off the engine and to open a throttle, having released access to the screw. To turn the screw clockwise for increase in turns or counter-clockwise for reduction. To translate the screw on II higher step of a cam and to check up engine turns. If necessary to repeat adjustment.