FORD SCORPIO

1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
- 3. Engines
   + 3.1. Engine OHC
   + 3.2. Engine DOHC
   - 3.3. Engine V6
      3.3.1. A technical characteristics
      3.3.2. The repair which is not demanding removal of the engine
      3.3.3. Engine removal
      - 3.3.4. Dismantling and check of details of the engine
         3.3.4.1. Engine dismantling
         3.3.4.2. Check of degree of deterioration of details of the engine
         3.3.4.3. Axis knot коромысел
         3.3.4.4. Pushers of valves and a bar of pushers
         3.3.4.5. A camshaft
         3.3.4.6. Heads of the block of cylinders
         3.3.4.7. Cylinders
         3.3.4.8. Check and restoration of pistons and piston rings
         3.3.4.9. Piston fingers and rods
         3.3.4.10. A cranked shaft
         3.3.4.11. Radical and шатунные bearings
         3.3.4.12. Distributive gear wheels
         3.3.4.13. A flywheel
         + 3.3.4.14. Greasing system
         3.3.4.15. Ventilation system картера
         + 3.3.4.16. Engine assemblage
         3.3.4.17. Adjustment of backlashes of valves
         3.3.4.18. Auxiliary details of the engine
         3.3.4.19. Engine installation
         3.3.4.20. Start of the engine after major repairs or restoration
      + 3.3.5. Changes in a design of engines V6 2,4 and 2,9 дм3
   + 3.4. Ignition and engine management systems
   + 3.5. Diesel engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment

3.3.4.18. Auxiliary details of the engine

PERFORMANCE ORDER

1. To screw in the gauge of a water temperature and to tighten according to the inhaling moment.

2. To establish the distributor and to adjust a corner of an advancing of ignition.

3. To clear a surface of the block of the cylinders, contacting to the oil filter, to oil consolidation of the oil filter. To screw in a new filtering element so that rubber consolidation has adjoined to the block, then to tighten on 3/4 turns.

4. To screw in the gauge of pressure of oil and to tighten it according to the inhaling moment. To establish basic arms of the engine.

The engine with fuel injection

5. To establish details on former places, to watch that their initial adjustment has not changed.

Carburettor engines

6. To insert a rod of the fuel pump into the block of cylinders, to establish isolating lining, the fuel pump and fixing bolts.

7. To establish the carburettor.

8. To connect a tube сапуна the engine to a cover клапанного the mechanism and топливопровод between the fuel pump and the carburettor.

9. To make installation automatic air заслонки to a water taking away connecting hose and a bypass hose to the thermostat case.

All engines

10. To establish the generator of an alternating current and to adjust a tension приводного a belt.

11. To establish an arm of a single pulley of the pump of the amplifier of a steering, having fixed it on a forward part of the engine two bolts.

12. To establish the pump of the amplifier of a steering and to adjust a tension приводного a belt.

13. To establish final collectors.

home