FORD SCORPIO

1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
- 8. A kardannyj shaft and the back bridge
   8.1. A technical characteristics
   + 8.2. A kardannyj shaft
   - 8.3. The back bridge
      8.3.1. Removal and installation of the back bridge
      8.3.2. Dismantling and assemblage of the back bridge
      8.3.3. Differential dismantling
      8.3.4. Differential assemblage
      8.3.5. Adjustment of bearings of gear wheels of the main transfer
      8.3.6. Adjustment of gear wheels of the main transfer
      8.3.7. Assemblage and adjustment of the main transfer
      8.3.8. Replacement of a sealing ring of a gear wheel of the main transfer
   + 8.4. Power shafts
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment

8.3. The back bridge

8.3.1. Removal and installation of the back bridge

THE GENERAL DATA

The back bridge

1 – the remote plug,

2 – a lining,

3 – a flange of adjustment of a backlash of the main transfer

Details of the back bridge

1 – картер,
2 – bearings of differential,
3 – a leading gear wheel of main transfer,
4 – a conducted gear wheel of main transfer,
5 – a cover картера the back bridge,
6 – a box of differential,
7 – semiaxial gear wheels,
8 – саттелиты, 9 – a type-setting lining,
10 – a nut of the bearing of a leading gear wheel,
11 – a flange of a leading gear wheel for connection with the back hinge карданного a shaft,
12 – a nut of a flange,
13 – a sealing ring,
14 – a blocking flange,
15 – the holder of the bearing,
16 – a compensatory washer

Differential with муфтой viscous coupling

1 – a target shaft,
2 – a box of differential,
3 – саттелиты,
4 – an axis, 5 – a semiaxial gear wheel,
6 – coupling,
7 – a flange

PERFORMANCE ORDER

1. To lift the car.

2. To remove pillows of fastening of a back part of an exhaust system and to shift it aside.

3. To remove карданный a shaft.

4. To remove power shafts from flanges of the back bridge for what with each party to unscrew six bolts "Torx" fastenings of internal hinges to a shaft flange.

5. To disconnect from the bottom the left support of a beam of the back bridge for providing of access to bolts of fastening of the back bridge to a beam.

6. To prop up the back bridge by means of a jack and to unscrew fastening bolts to a beam of a back suspension bracket.

7. To remove an arm of a suspension bracket of a cover картера the back bridge.

8. To unscrew fastening hairpins картера the back bridge.

9. To lower a jack and to take the back bridge from under the car.

Installation

To execute actions in return sequence in relation to removal process. After installation it is necessary to check up oil level in картере the back bridge.

home