1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
- 6. Coupling
   6.1. A technical characteristics
   - 6.2. Service and repair
      6.2.1. Coupling removal
      6.2.2. Coupling check
      6.2.3. Coupling installation
      6.2.4. Replacement of the needle bearing of a shaft of coupling
      6.2.5. Replacement of a cable of coupling
      6.2.6. The mechanism of a pedal of coupling
      6.2.7. Replacement of a pedal of coupling
      6.2.8. Removal and installation выжимного the bearing
      6.2.9. Free wheeling adjustment
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


6.2.2. Coupling check
1. To check up a leading disk of coupling – development traces (are specified by arrows) on the ends of a press spring there should be no more than 0,3 mm.
2. To check up reliability of spring connection between a leading disk and a cover. Presence of scratches and absence or damage of rivets (connecting elements are specified by arrows) is not supposed.
3. To check up a leading disk on absence of cracks, пригаров and deterioration of a surface.
4. By means of a ruler and щупа to check up неплоскостность a press disk which should be no more than 0,3 mm (1 – a ruler, 2 – щуп).
5. To measure a thickness of overlays of a conducted disk of coupling. If the thickness of overlays of less admissible to replace overlays or a conducted disk.
6. To check up palpation of a conducted disk which than 0,5 mm should be no more.