1985-1994 of release

Repair and car operation

Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. A technical characteristics
   5.2. Fuel
   5.3. Neetilirovannyj gasoline of engines V6, 2.4 and 2.9 дм3
   + 5.4. System of giving of air
   + 5.5. Carburettor PIERBURG
   - 5.6. Carburettor WEBER 2V
      5.6.1. Adjustment of turns of idling and quality of a mix
      5.6.2. Removal and carburettor installation
      5.6.3. Assemblage and carburettor adjustment
      5.6.4. Adjustment of a backlash air заслонки
      5.6.5. Adjustment of a backlash of an intermediate step
   + 5.7. Carburettor WEBER 2V TLD
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


5.6.4. Adjustment of a backlash air заслонки

Adjustment of a backlash air заслонки

1 – a rod of a membrane,

2 – an elastic band fixing поводковый the lever,

3 – поводковый the lever,

4 – a screw-driver

Measurement of a backlash air заслонки

1 – the calibrated core or a shaft of a drill,

2 – a screw-driver,

3 – the lever of a drive throttle заслонки

Labels of adjustment of the starting arrangement


Adjustment of a backlash air заслонки is necessary for making after dismantling of the carburettor or in case of not enough effective work of the engine.

1. To remove a wire of weight from the accumulator and the air filter.
2. To put labels, to unscrew 3 screws of fastening of a flange, to remove a flange and a starting arrangement cover.
3. To take shielding ring.
4. To establish the lever throttle заслонки in position of full opening.
5. To move поводковый the starting arrangement lever upwards before full closing air заслонок and to release the lever of a drive throttle заслонок.
6. To fix an elastic band поводковый the lever in the top position.
7. A screw-driver to press a membrane rod against the stop.
8. To measure by the calibrated core (it is possible a drill shaft) a backlash air заслонки.
9. In case of discrepancy of a backlash to demanded value to remove a protective cap from the adjusting screw and, rotating a screw-driver the adjusting screw, to establish a demanded backlash.
10. To establish shielding ring.
11. To establish a cover with a bimetallic spring, having combined thus installation labels. For mix adjustment it is possible to turn a cover with a bimetallic spring in one or other party.