FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
- 5. Fuel system
   5.1. A technical characteristics
   5.2. Fuel
   5.3. Neetilirovannyj gasoline of engines V6, 2.4 and 2.9 дм3
   - 5.4. System of giving of air
      5.4.1. Removal and installation of the air filter
      5.4.2. A temperature regulator
      5.4.3. The fuel pump
      5.4.4. Replacement of the fuel filter by engines with system of injection of fuel
      5.4.5. Removal and installation of a fuel tank
      5.4.6. Removal and installation of the gauge of measurement of level of fuel
      5.4.7. Removal and installation of the inertial switch of giving of fuel
      5.4.8. Removal and installation of a pedal of an accelerator
      5.4.9. Removal and installation of a cable of an accelerator
      5.4.10. A steam separator
   + 5.5. Carburettor PIERBURG
   + 5.6. Carburettor WEBER 2V
   + 5.7. Carburettor WEBER 2V TLD
   + 5.8. System of injection of fuel
   5.9. Removal and installation of an inlet collector
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

5.4.1. Removal and installation of the air filter
THE GENERAL DATA

ENGINES WITH THE CARBURETTOR

The air filter of engines OHC with the carburettor

1 – the case,

2 – a cover,

3 – a filtering element,

4 – a vacuum diaphragm,

5 – a branch pipe of giving of cold air

The air filter of engines DOHC with the carburettor

1 – the case,

2 – a filtering element,

3 – a cover,

4 – a branch pipe of giving of the warmed-up air,

5 – a branch pipe of giving of cold air

PERFORMANCE ORDER
1. To unscrew screws of a cover of the air filter.
2. To remove spring clips and a cover of the air filter.
3. To take the air filter.
4. To wipe an internal surface of the case of the air filter.
5. To disconnect an inlet highway of cold air.
6. To disconnect a vacuum tube from an inlet collector and a highway of giving of hot air from заборника a final collector.
7. To unscrew screws of fastening of the case of the air filter to a cover of a head of the block of cylinders.
8. Installation is made in sequence, return to removal.

ENGINES DOHC WITH SYSTEM OF INJECTION OF FUEL


The air filter of engine DOHC with system of injection of fuel



1 – a cover,

2 – the case,

3 – a filtering element,

4 – a measuring instrument of a stream of air,

5 – a branch pipe

PERFORMANCE ORDER
1. To disconnect a socket from the valve of management of idling turns on a forward part of the chamber of superfluous pressure.
2. To remove an intaking hose from an air inlet tube.
3. To unscrew a nut of fastening and to remove воздухозаборную a tube with скобы on the forward panel of a motor compartment.
4. To remove spring clips of fastening of a cover of the air filter, then to disconnect and remove воздухозаборную a tube, the chamber of superfluous pressure and a cover of the air filter as one assemblage, having disconnected a ventilation hose картера from воздухозаборной tubes.
5. To take the air filter, having noted, how it has been established.
6. To wipe an internal surface of the case of the air filter.
7. Installation is made in sequence, return to removal.

ENGINES WITH SYSTEM OF INJECTION OF FUEL

The air filter of engine OHC with system of injection of fuel


1 – the case,

2 – a filtering element,

3 – a cover,

4 – a measuring instrument of a stream of air,

5 – branch pipes

PERFORMANCE ORDER
1. To remove 4 spring clips of fastening of a cover of the air filter.
2. To raise a cover and to move it aside. For full removal of a cover to disconnect a measuring instrument or to unscrew a cover.
3. To take the air filter, having noted, how it has been established.
4. To wipe an internal surface of the case of the air filter.
5. To unscrew three nuts of fastening under an arch of the left wheel, to disconnect the case of the air filter from воздухозаборного a hose and to remove it.
6. Installation is made in sequence, return to removal.