FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
- 2. Maintenance service
   2.1. Periodicity of service of cars
   2.2. Each 10 000 km or once a year
   2.3. Each 40 000 km
   2.4. Each 60 000 km or in 2 years
   2.5. Check of level of engine oil
   2.6. Engine oil and filter replacement
   2.7. Places of possible leaks of engine oil and their definition
   2.8. Check of level and replacement of a cooling liquid
   2.9. Check of tightness of system of cooling
   2.10. Spark plugs
   2.11. Replacement of the air filter
   2.12. Replacement of the fuel filter
   2.13. Replacement of the valve of ventilation картера the engine
   2.14. Liquid check in air central air
   2.15. Check of level of oil in a transmission
   2.16. Check of level of oil in the back bridge
   2.17. Check of a condition of a protective cover of a power shaft
   2.18. Adjustment of a brake tape in an automatic transmission
   2.19. Check of a condition forward and back brake колодок
   2.20. Check of level and replacement of a brake liquid
   2.21. Check of a condition of a suspension bracket
   2.22. Check of level of a liquid in system of the amplifier of a steering
   2.23. Clearing of a drain for a condensate formed at work of the conditioner
   2.24. Recommendations about engine oils
   2.25. Specifications
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

2.10. Spark plugs
THE GENERAL DATA

Interelectrode backlash of a spark plug


Check by a template of an interelectrode backlash of a spark plug


Before removal of spark plugs to remove a dirt, using a pure brush, a vacuum cleaner or compressed air that prevents dirt hit in engine cylinders.

PERFORMANCE ORDER
1. To remove from spark plugs tips of high-voltage wires, and it is necessary to remove for a tip, instead of for a wire.
2. To unscrew spark plugs.
3. Check of spark plugs shows an engine condition. If the nasal part of an insulator of a spark plug pure and white, it shows that a mix too poor or "hot" spark plugs are used.
4. If the tip and a nasal part of an insulator are covered by firm black touch, it shows that a mix too rich. If black and oil, it is probable that the engine is worn out.
5. If the nasal part of an insulator is covered by easy light brown touch the mix is optimum, and it is probable that the engine in a good condition.
6. Щупом to check up an interelectrode backlash of a spark plug.
7. The interelectrode backlash of a spark plug has great value as at too big or too small backlash, the size of a spark of ignition and efficiency will be insufficient for normal work of the engine.
8. For installation of an interelectrode backlash to turn in an external electrode before reception of a demanded backlash. Not to bend at all the central electrode as it can split an insulator.
9. Carefully to wipe a carving part of a candle and to grease антипригарным with structure.
10. A hand to screw in a spark plug, having excluded its warp and to tighten the demanded moment. The moments of a tightening of spark plugs:
      – Engine OHC – 25 Nanometers;
      – Engine DOHC – 20 Nanometers;
      – Engine V6 2,9 – 40 Nanometers;
      – Engine V6 2,4 – 30 Nanometers.
11. To establish on candles tips of high-voltage wires and to check up reliability of their installation.