1985-1994 of release

Repair and car operation

Ford Skorpio
- 1.1. Car identification
   1.2. Prevention signs
   1.3. The panel of devices and a combination of devices
   1.4. Control levers on a steering column
   1.5. Keys
   1.6. Doors
   1.7. Blocking of a steering column / the ignition lock
   1.8. A manual transmission
   1.9. An automatic transmission
   1.10. Стеклоподъемники with the electric drive
   1.11. Adjustment of position of a steering wheel
   1.12. Sitting lobbies
   1.13. Salon illumination
   1.14. External rear-view mirrors with the electric drive
   1.15. Increase in volume of a luggage space
   1.16. Screen wipers and washers
   1.17. Car lifting
   1.18. Car towing
   1.19. Engine start
   1.20. Start of the cold petrol engine
   1.21. Start of the hot petrol engine
   1.22. Start of the petrol engine with a fuel modulation
   1.23. Start of the diesel engine
   1.24. Features of operation of the car
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


1.9. An automatic transmission

Following positions of the lever are possible:

P – a parking. This position should be established only at a car stop. Driving wheels are blocked in this position and interfere with car moving. It is necessary to tighten also a manual brake. It is forbidden to establish the lever in this position at car movement;
R – a backing. This position should be established only at the stopped car and the engine idling;
N – neutral position. This position should be established at start of the engine and its work idling;
D – advance. Usual position at movement. It is possible to pass from position D in positions 3, 2 or 1 at car movement;
3 – car movement occurs only on first three transfers;
2 – movement only on 1 and 2 transfers. It is used at movement without the trailer on roads with liftings or descents in mountains or movement with a speed to 40 km/hour;
1 – movement only on 1 transfer. It is used at movement with strong liftings and descents.

Engine start

The engine to start only at lever position in N and P.