| 1. To remove a negative wire from the accumulator. |
The prevention To remove pressure in the hydraulic accumulator of brake system. For this purpose it is necessary to switch off ignition and to press against the stop a brake pedal (about 20 times) while it does not become "firm".
|
| 2. To remove an upholstery under the panel of devices from outside the driver. |
|
3. To remove a spring clip of fastening of a pedal of a brake (2) to a pusher of hydraulic knot (1). |
| 4. To take a shaft of a brake pedal, moving it to the left before clearing of a brake pedal. |
| 5. To remove a brake pedal, having noted an order of an arrangement of washers and linings. |
| 6. Installation is made in sequence, return to removal. |
| 7. After pedal installation to check up work of the switch of fires of braking. |
