FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
- 10. Suspension brackets
   + 10.1. A forward suspension bracket
   - 10.2. A back suspension bracket
      10.2.1. A technical characteristics
      - 10.2.2. Service and repair
         10.2.2.1. Shock-absorber replacement
         10.2.2.2. Replacement of a spring of a suspension bracket
         10.2.2.3. Removal and installation of the lever of a suspension bracket
         10.2.2.4. Replacement металлорезиновой plugs of a beam of a back axis
         10.2.2.5. Removal and stabilizer installation
         10.2.2.6. Replacement of bearings of a nave of a wheel
         10.2.2.7. System of adjustment of a road gleam (road clearance)
         10.2.2.8. Removal and compressor installation
         10.2.2.9. Replacement of the gauge of height
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

10.2.2.7. System of adjustment of a road gleam (road clearance)
THE GENERAL DATA

Elements of system of adjustment of a road gleam

1 – the compressor,
2 – a separator of a moisture,
3 – a socket,
4 – the electromagnetic valve of dump of pressure,
5 – the gauge of height,
6 – a side scene,
7 – the special shock-absorber,
8 – the block of safety locks,
9 – the compressor relay

Elements of fastening of a tube


The height gauge


The special shock-absorber

The system supports height of a back part of the car at one level irrespective of car loading.

The system of adjustment of a road gleam consists of the gauge of height, the compressor, two special shock-absorbers, the relay of the compressor and connecting tubes. The compressor makes air pumping in shock-absorbers on signals of the gauge of height. Change of height of position of a body is defined within 20 seconds then the corresponding command moves. Compressor inclusion is made for the period of no more than 5 minutes. Repair of separate elements of system is not provided.