FORD SCORPIO

1985-1994 of release

Repair and car operation


Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
- 9. A steering
   9.1. A technical characteristics
   - 9.2. Service and repair
      9.2.1. Removal and installation of steering transfer
      9.2.2. Dismantling and assemblage of steering transfer
      9.2.3. Removal and steering wheel installation
      9.2.4. A steering wheel centering
      9.2.5. Removal and installation of the lock of blocking of a steering column
      9.2.6. Removal and installation of a steering column
      9.2.7. Dismantling and assemblage of a steering shaft
   + 9.3. A steering with the hydraulic booster
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

9.2.2. Dismantling and assemblage of steering transfer
THE GENERAL DATA

Steering transfer

Dismantling

PERFORMANCE ORDER
1. To disconnect tips with spherical hinges from steering draughts after easing of fastening of counternuts.
2. To remove collars of fastening of casings and to remove protective a casing of the case of steering transfer.
3. To move gear рейку to the left against the stop and to clamp in a vice with soft sponges.
4. A corresponding key to unscrew steering draughts from gear рейки.
5. To remove an emphasis cap рейки adjusting оправкой 13.009, to take a spring and an emphasis рейки.
6. To uncover приводной gear wheels of steering transfer together with its lining.
7. To remove the bearing from a shaft приводной gear wheels of steering transfer.
8. To take gear рейку from the transfer case.
9. To take a nylon directing ring on the right side of the case of steering transfer.

Assemblage

PERFORMANCE ORDER
1. To clear and check up a technical condition of all details; to replace the worn out or damaged details.
2. To insert into the case a nylon directing ring on the right side of the case of steering transfer.
3. To attach gear рейку to the case of steering transfer and to establish рейку on the average position.
4. To establish приводную a gear wheel in the case of steering transfer together with the bearing.
5. To establish in the case of steering transfer an emphasis and a spring.
6. To establish on hermetic a protective cap of an emphasis рейки, to tighten its moment of 40-50 Nanometers, and then to unscrew it on a corner 65 °.
7. By means of a dynamometer to check up the moment of resistance during turn приводной gear wheels of steering transfer.
8. To move gear рейку in the case against the stop to the left and to clamp in a vice with soft sponges.
9. To connect steering bent for gear рейке and to put on protective a casing of the case of transfer.
10. To establish new collars of fastening of casings.
11. To connect to steering draughts tips with spherical hinges and to fix them from unscrewing.