FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
- 4. Cooling system
   4.1. A technical characteristics
   + 4.2. Plums of a liquid and filling of system of cooling
   4.3. Removal and radiator installation
   4.4. Removal and thermostat installation
   - 4.5. The fan
      4.5.1. Removal and installation of the fan with hydraulic муфтой
      4.5.2. Removal and installation of the fan from an electric drive
   4.6. The pump of system of cooling
   4.7. The temperature gauge
   4.8. A privodnoj belt of engine DOHC
   4.9. The tension mechanism приводного a belt
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment


b087f616

4.5. The fan

4.5.1. Removal and installation of the fan with hydraulic муфтой
THE GENERAL DATA

The fan of a radiator of engine OHC

1 – hydraulic муфта the fan,

2 – blades of the fan,

3 – the generator,

4 – a belt,

5 – a pulley of the fan,

6 – a pulley of a cranked shaft

Key for unscrewing муфты the fan

The sizes: X=25мм, Y=12мм.

Hydraulic муфта the fan

 
1, 2, 3 – a forward part of the case,
4 – a bimetallic spring,
5 – the case with edges of cooling,
6 – the valve,
7 – an inlet aperture,
8 – consolidation,
9 – a rotor,
10 – a power shaft

PERFORMANCE ORDER
1. To disconnect from the accumulator a weight wire.
2. To remove the top part of a casing of the fan, having unscrewed two bolts and having disconnected four clips.
3. To unscrew муфту the fan from a nave of the pump of a cooling liquid. For unscrewing it is necessary bent рожковый a key s=32 (OHC) or s=36мм (V6).

The prevention

The fastening nut муфты the fan has the left carving.


4. At nut unscrewing муфты the fan to clamp клиновой a belt and thus to prevent a nave from проворачивания.
5. To unscrew 4 bolts and to remove крыльчатку with муфты.
6. Installation is made in sequence of return to removal.