FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   + 13.3. Doors
   + 13.4. External elements of a body
   - 13.5. Salon elements
      13.5.1. Removal and installation of an upholstery of a ceiling
      13.5.2. Removal and installation of an internal rear-view mirror
      13.5.3. Removal and installation of the panel of devices
      13.5.4. Removal and installation of the central console
      13.5.5. Removal and installation of the top console
      13.5.6. Removal and installation of a back shelf (model Salon)
      13.5.7. Removal and installation of forward sitting
      13.5.8. Removal and installation of seat belts of forward seats
      13.5.9. Removal and installation of seat belts of a back seat
      13.5.10. Removal and installation of back sitting
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment


b087f616

13.5.10. Removal and installation of back sitting

PILLOW

PERFORMANCE ORDER
1. To cast away a sitting pillow forward and to unscrew screws of fastening of loops.
2. To remove loops (arrow), having unscrewed them from a body.
3. At installation to screw up screws of fastening of loops by hand, to check up position of pillows, then to tighten screws with the demanded moment.

BACKS

PERFORMANCE ORDER
1. To cast away backs forward, to combine a luggage space rug back, to unscrew and remove loops (arrow) of backs.
2. To release clips of directing belts and to remove backs.
3. Installation is made in sequence, return to removal.

BACK LATCH

PERFORMANCE ORDER
1. To cast away backs forward.
2. To unscrew two screws (are specified by arrows) and to uncover latches.
3. To unscrew two screws "Тогх" of fastening of a latch. To disconnect operating draught from a latch and to remove it.
4. To take operating draught and the button.
5. Installation is made in sequence, return to removal.