FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
- 13. A body
   13.1. Care of a body
   + 13.2. A cowl
   - 13.3. Doors
      13.3.1. Removal and installation of doors
      13.3.2. Adjustment of position of a door
      13.3.3. Removal and installation of the panel of an internal upholstery of doors
      13.3.4. Removal and installation of external handles of a door
      13.3.5. Removal and installation of the cylinder of the lock of a door
      13.3.6. Removal and installation of the lock of a door
      13.3.7. Removal and installation of a sealant of a door
      13.3.8. Removal and installation of glasses of a door
      13.3.9. Removal and mechanism installation стеклоподъемника
      13.3.10. Removal and installation of decorative lateral overlays of doors
      13.3.11. Removal and installation of decorative overlays of a frame of glasses of a door
      13.3.12. Removal and installation of external rear-view mirrors
      13.3.13. Removal and installation of a back door
      13.3.14. Removal and installation of the cylinder of the lock of a door of a luggage carrier
      13.3.15. Removal and installation of the lock of a back door
      13.3.16. Removal and installation газонаполненного an emphasis of a door of a luggage carrier
      13.3.17. Removal, installation and adjustment of a cover of a luggage carrier (model Salon)
      13.3.18. Removal and installation of the lock of a cover of a luggage carrier (model Salon)
   + 13.4. External elements of a body
   + 13.5. Salon elements
   + 13.6. Heating and ventilation system
   + 13.7. The conditioner
+ 14. An electric equipment


b087f616

13.3.17. Removal, installation and adjustment of a cover of a luggage carrier (model Salon)
PERFORMANCE ORDER
1. To open a cover of a luggage carrier and, using a marker, to lead round a loop contour on an internal surface of a cover.
2. To remove from an internal surface of a cover the decorative panel.
3. To remove sockets from the lock and the alarm switch.
4. To disconnect a plait of wires from clips and to adhere to each socket a cord of the corresponding length. To take a plait of wires from a cover, then to untie a cord and to leave it in a luggage carrier cover.
5. To unscrew four bolts (fastenings of loops are specified by arrows) and to uncover.
6. Establish a cover, having combined loops with earlier made marks, and tighten bolts of loops. To adhere to a plait of wires a cord and for a cord to involve wires in a luggage carrier cover.
7. To connect sockets to the lock and the alarm switch.
8. To establish the decorative panel and to fix it by means of clips.
9. To close a cover of a luggage carrier and to check up, that the backlash on cover perimetre was identical. If necessary it is possible to correct backlashes, having released bolts of loops and having moved a cover.
10. To tighten bolts.