Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
- 11. Brake system
11.1. A technical characteristics
- 11.2. Forward brakes
11.2.1. Replacement brake колодок
11.2.2. Support replacement
11.2.3. Replacement of a brake disk
+ 11.3. Back brakes
11.4. Adjustment of a manual brake
11.5. Removal of air from brake system
+ 11.6. Antiblocking system
+ 12. Wheels and tyres
+ 13. A body
+ 14. An electric equipment
|
The prevention Disks of both forward brakes should have an identical thickness and a surface condition, only then both wheels will be braked simultaneously. Therefore it is recommended to replace simultaneously both disks.
Removal
| PERFORMANCE ORDER |
| 1. To remove brake колодки (subsection 11.2.1 see). |
| 2. To suspend a support to a body by means of a wire to protect a brake hose from damage. |
| 3. To unscrew the holder of a support from a rotary fist of a wheel. |
| 4. To unscrew the screw of fastening of a brake disk from a nave of a wheel and to remove a brake disk. |
|
Installation
| PERFORMANCE ORDER |
|
|
1. To establish a brake disk and to screw up the screw of its fastening to a wheel nave (the arrow specifies a spring adjusting ring of fastening of a brake disk). |
| 2. To screw the holder of a support on a rotary fist of a wheel. |
| 3. To establish brake колодки and a support (subsection 11.2.1 see). |
| 4. To establish wheels, to lower the car and to tighten nuts of fastening of wheels. |
| 5. Some times strongly to press a brake pedal to result brake колодки in contact to a brake disk. |
|
|
|
