FORD SCORPIO

1985-1994 of release

Repair and car operation



Ford Skorpio
+ 1.1. Car identification
+ 2. Maintenance service
+ 3. Engines
+ 4. Cooling system
+ 5. Fuel system
+ 6. Coupling
+ 7. Transmissions
+ 8. A kardannyj shaft and the back bridge
+ 9. A steering
+ 10. Suspension brackets
+ 11. Brake system
+ 12. Wheels and tyres
+ 13. A body
- 14. An electric equipment
   14.1. A technical characteristics
   14.2. Safety locks and the relay
   14.3. Electronic blocks of management
   14.4. System of the central blocking
   14.5. System of indexes of turns
   14.6. The fuel computer
   14.7. Additional control system
   + 14.8. The generator
   + 14.9. A starter
   + 14.10. A windscreen screen wiper, knot of indexes and a headlight
   14.11. Removal and installation of a combination of devices
   14.12. External and internal illumination
   + 14.13. An other electric equipment
   + 14.14. Electroschemes


b087f616

14.11. Removal and installation of a combination of devices
THE GENERAL DATA

All control and measuring devices are placed on a combination of devices. For replacement of control bulbs and measuring devices removal of a combination of devices is necessary.

Removal

PERFORMANCE ORDER
1. To disconnect a wire of weight from the accumulator.

The prevention

The information in electronic memories is thus erased from memory.


The cars made to 04.1992 years
2. To unscrew four screws (fastenings of a decorative overlay of a combination of devices are specified by arrows) and to remove it.
3. To unscrew four screws (are specified by arrows) fastenings of a combination of devices and a little a tax forward a combination of devices from the forward panel.
The cars made about 04.1992 years
4. To unscrew screws (are specified by arrows) and to disconnect clips (fastenings of a decorative overlay of a combination of devices are specified by arrows) and to remove it.
5. To unscrew four screws (fastenings of a combination of devices are specified by arrows) and to remove it.
6. Also it is necessary to separate a regulator of illumination of devices.
All models
7. From the back party to remove a socket of multicontact connection.

The prevention

The socket of red colour of the graphic display has a stopper which is necessary for wringing out preliminary.


8. To disconnect a cable of a drive of a speedometer for what to shift to the right the big lock ring of fixing of a cable of a speedometer to a combination of devices.
9. To take a combination of devices from the panel of devices.

Installation

For installation of a combination of devices it is necessary to execute actions in return sequence in relation to removal process.

Removal and installation of measuring devices

PERFORMANCE ORDER
1. To disconnect a wire of weight from the accumulator.

The prevention

The information in electronic memories is thus erased from memory.


2. To remove a combination of devices from the panel of devices. To place a combination of devices it is possible on a table covered soft безворсовой a fabric devices downwards.
3. To remove two clips from a combination of devices, having picked up their screw-driver.
4. To remove all control bulbs (are specified by arrows), turning a cartridge of their fastening counter-clockwise.
5. On the cars made till 05.1989 to unscrew all nuts on plugs of an assembly payment and to release a payment from clamps and to remove it.
6. On the cars made since 06.1989 cautiously to remove an assembly payment from a combination of devices.
7. In the presence of adjusting handles of glass from outside of a combination of devices to remove them.
8. To remove two fixing clips from the bottom part of glass, to turn glass upwards and to remove it.
9. For speedometer removal to unscrew three (in the cars made till 01.1992) or two (from 02.1992) the screw of fastening of the speedometer, the combinations of devices located from the back party, and to remove a speedometer pushing it forward.
10. For removal of hours or a tachometre to unscrew three screws of fastening located from the back party of a combination of devices, and to remove the device pushing it forward.

The prevention

To have a tachometre a forward part downwards it is possible only for short time as from a tachometre the silicone liquid can pour out.


11. For removal of indexes of level of fuel and temperature of a cooling liquid to unscrew three screws of fastening located from the back party of a combination of devices, and to remove devices pushing them forward.

Installation

For installation of devices it is necessary to execute actions in return sequence in relation to removal process.